3G & APP

How to use iPhone App iCamViewer to view Brickcom IP Camera?

Follow the steps below to get the video streaming on iPhone.

Scenario:


Step1. Go to the Video Configuration page and configure the stream setting as the parameters below.
Aspect Ratio of 4:3
Video codec as H.264 for stream1
Resolution: 640x480 or lower
Frame Rate at 5 fps
Bitrate 512Kbps
The Video settings of 3GPP will need to be configured depends on the bandwidth of your network environment. The configuration is just for reference.



Step2. Go to the HTTP/HTTPS Configuration page and configure the HTTP port, e.g. 2000.



Step3. Configure the Port Forwarding rule in Router. Add the port 2000 to IP Camera’s IP Address.



Step4. Connect iPhone to Internet, via 3G or Wi-Fi.



Step5. Download and install the iCamViewer, to enable the iCamViewer.



Step6. Click the Config button in iCamViwer’s main window.



Step7. Configure the profile with proper information.



Step8. Get the video streaming on your iPhone.



Note:
*iCamViewer is free App.
*Support more than 12 channels.
*Only view one camera at one time.
*Able to assign different ports for different cameras.