How to use iPhone App Brickcom Viewer to view Brickcom IP Camera?

To follow the steps below to get the video streaming on iPhone.


Step1. Go to the Video Configuration page and configure the stream setting as the parameters below.

Aspect Ratio as 4:3
Video codec as H.264 for stream1
Resolution as 640x480or lower
Frame Rate as 5 fps
Bitrate 512Kbps

The Video settings of 3GPP will need to be configured depends on the bandwidth of your network environment. The configuration just for the reference.

Step2. Go to the HTTP/HTTPS Configuration page and configure the HTTP port, e.g. 2000.

Step3. Configure the Port Forwarding rule in Router. Add the port 2000 to IP Camera’s IP Address.

Step4. Connect iPhone to Internet, via 3G or Wi-Fi.

Step5. Download and install the Brickcom Viewer, click + to add camera.

Step6. Set the Group Name and click + to add camera to this group.

Step7. Fill in all the information then click Done button.


Step8. Get the video streaming on your iPhone.

* Brickcom Viewer is a free App.
*Support 6 channels in a group and more than 3 groups.
*can preview 6 cameras at the same time.
*Able to assign different ports for different camera.